From: Steve Hume <stevelist-AT-hume.ca>
Date: 19 Jun 2009 14:07:40 UTC   (06:07:40 PM in author's locale)
To: xtensionlist-AT-shed.com

I have a 2-way 3-pin PAM22 X-10 Pro Appliance module. It seems to be
turning itself off when it feels like it. I changed its house code
and it is still behaving badly.

There are no scripts on the unit itself and I had enabled the 2-way
extended reporting on it.

The first log is from the wired receiver on the other house "phase" so
it too is seeing this command. The second one presumably is the unit
reporting that it is on strike. I turn it on again and it goes off
within half a day. A booster-fan is connected to it to pull more air
conditioned air to the far reaches from the furnace.
Maybe that's why they were on special one day?

19-Jun-09 2:17:51 PM received Extended Code for address H1 from
WirePhase1
19-Jun-09 2:17:52 PM Received extended code for Guest Room Booster Fan
Command = 56 Data = 192 (powerline interface)
19-Jun-09 2:17:52 PM Setting value of Guest Room Booster Fan to 0

While typing this email it went off again but with more of a flourish;
first reporting that it was on 5 times and then going on strike. It
does not seem to ever turn itself ON by itself.

Perplexed,

Steve Hume

19-Jun-09 6:00:33 PM Received extended code for Guest Room Booster Fan
Command = 56 Data = 255 (powerline interface)
19-Jun-09 6:00:33 PM Setting value of Guest Room Booster Fan to 100
19-Jun-09 6:00:33 PM received Extended Code for address K7 from
WirePhase1
19-Jun-09 6:00:34 PM Received extended code for Furnace Light Command
= 56 Data = 128 (powerline interface)
19-Jun-09 6:00:34 PM Setting value of Furnace Light to 0
19-Jun-09 6:00:41 PM Received extended code for Guest Room Booster Fan
Command = 56 Data = 255 (powerline interface)
19-Jun-09 6:00:41 PM Setting value of Guest Room Booster Fan to 100
19-Jun-09 6:00:46 PM Received extended code for Guest Room Booster Fan
Command = 56 Data = 255 (powerline interface)
19-Jun-09 6:00:46 PM Setting value of Guest Room Booster Fan to 100
19-Jun-09 6:00:54 PM Set preset of Thermo Status to 8 (powerline
interface)
19-Jun-09 6:00:55 PM Set preset of Thermo15 to 5 (powerline interface)
19-Jun-09 6:00:55 PM Setting value of Inside Temp to 73
19-Jun-09 6:00:55 PM received Preset Dim 0 for address J6 from
WirePhase1
19-Jun-09 6:00:55 PM received Preset Dim 0 for address J15 from
WirePhase1
19-Jun-09 6:01:42 PM Received extended code for Guest Room Booster Fan
Command = 56 Data = 255 (powerline interface)
19-Jun-09 6:01:42 PM Setting value of Guest Room Booster Fan to 100
19-Jun-09 6:04:37 PM received Extended Code for address H1 from
WirePhase1
19-Jun-09 6:04:37 PM Received extended code for Guest Room Booster Fan
Command = 56 Data = 255 (powerline interface)
19-Jun-09 6:04:37 PM Setting value of Guest Room Booster Fan to 100
19-Jun-09 6:04:38 PM Interface error: (Powerline reception error)
19-Jun-09 6:04:38 PM received Extended Code for address H1 from
WirePhase1
19-Jun-09 6:04:38 PM received Extended Code for address H1 from
WirePhase1
19-Jun-09 6:04:39 PM Interface error: (Powerline reception error)
19-Jun-09 6:04:39 PM received Extended Code for address H1 from
WirePhase1
19-Jun-09 6:04:40 PM Received extended code for Guest Room Booster Fan
Command = 56 Data = 192 (powerline interface)
19-Jun-09 6:04:40 PM Setting value of Guest Room Booster Fan to 0
_______________________________________________
XTensionlist mailing list
XTensionlist-AT-shed.com
lists.shed.com/mailman/listinfo/xtensionlist