XTension Discussion
Re: PowerLinc USB crashing/not responding on iMac/10.5?
Hello Nicholas,
I also have had to give up my trusty old G4 dual with 10.4, but only
because of hardware problems with
the Mac, but before then, I had to 'shelve' the Powerlinc USB because
it just totally broke.
So I've not had a chance to run the Plink on the iMac (have two of the
24" models).
But the kind of problem you're having smells much of a USB type of
problem that I THINK
has been resolved in later versions of XTension.
What version are you running now ??
michael
On Jun 14, 2009, at 1:52 PM, Nicholas Riley wrote:
> I'm finally in the process of retiring my 2001-vintage dual G4
> running 10.4. Its replacement is a 24" iMac running 10.5.
>
> The G4 had run XTension for OS X with a PowerLinc USB reliably for
> about 4 years. Since I've moved the PowerLinc to the iMac I've run
> into two problems:
>
> 1) "plink.isf" crashes. The last time it happened when I was
> quitting XTension; the other two times, it crashed when I unplugged
> a USB device. XTension did not seem to recover from these crashes;
> I had to quit and restart it to get it going again. (Crash reports
> are attached if they are of any help.)
>
> 2) A couple of times the interface just stopped responding in either
> direction. When I tried to send commands the "queued" indicator in
> the PowerLinc status window filled up and nothing happened. Again,
> quitting and restarting XTension fixed the problem.
>
> Any suggestions on getting XTension more reliable on my iMac?
>
> Thanks,
>
> --Nicholas
>
> <
> plink
> .isf_2009
> -06
> -14
> -122555_mary
> .crash
> >
> <
> plink
> .isf_2009
> -06
> -08
> -112942_mary
> .crash
> >
> <
> plink
> .isf_2009
> -06
> -06-103105_mary.crash>_______________________________________________
> XTensionlist mailing list
> XTensionlist-AT-shed.com
> lists.shed.com/mailman/listinfo/xtensionlist
_______________________________________________
XTensionlist mailing list
XTensionlist-AT-shed.com
lists.shed.com/mailman/listinfo/xtensionlist
I also have had to give up my trusty old G4 dual with 10.4, but only
because of hardware problems with
the Mac, but before then, I had to 'shelve' the Powerlinc USB because
it just totally broke.
So I've not had a chance to run the Plink on the iMac (have two of the
24" models).
But the kind of problem you're having smells much of a USB type of
problem that I THINK
has been resolved in later versions of XTension.
What version are you running now ??
michael
On Jun 14, 2009, at 1:52 PM, Nicholas Riley wrote:
> I'm finally in the process of retiring my 2001-vintage dual G4
> running 10.4. Its replacement is a 24" iMac running 10.5.
>
> The G4 had run XTension for OS X with a PowerLinc USB reliably for
> about 4 years. Since I've moved the PowerLinc to the iMac I've run
> into two problems:
>
> 1) "plink.isf" crashes. The last time it happened when I was
> quitting XTension; the other two times, it crashed when I unplugged
> a USB device. XTension did not seem to recover from these crashes;
> I had to quit and restart it to get it going again. (Crash reports
> are attached if they are of any help.)
>
> 2) A couple of times the interface just stopped responding in either
> direction. When I tried to send commands the "queued" indicator in
> the PowerLinc status window filled up and nothing happened. Again,
> quitting and restarting XTension fixed the problem.
>
> Any suggestions on getting XTension more reliable on my iMac?
>
> Thanks,
>
> --Nicholas
>
> <
> plink
> .isf_2009
> -06
> -14
> -122555_mary
> .crash
> >
> <
> plink
> .isf_2009
> -06
> -08
> -112942_mary
> .crash
> >
> <
> plink
> .isf_2009
> -06
> -06-103105_mary.crash>_______________________________________________
> XTensionlist mailing list
> XTensionlist-AT-shed.com
> lists.shed.com/mailman/listinfo/xtensionlist
_______________________________________________
XTensionlist mailing list
XTensionlist-AT-shed.com
lists.shed.com/mailman/listinfo/xtensionlist
Previous message in thread | Next message in thread
Thread
PowerLinc USB crashing/not responding on iMac/10.5? / Nicholas Riley / 14 Jun 2009
• Re: PowerLinc USB crashing/not responding on iMac/10.5? / michael <michael-AT-shed.com> / 14 Jun 2009
Re: PowerLinc USB crashing/not responding on iMac/10.5? / Nicholas Riley <njriley-AT-uiuc.edu> / 14 Jun 2009
Re: PowerLinc USB crashing/not responding on iMac/10.5? / James Sentman <james-AT-sentman.com> / 14 Jun 2009
Re: PowerLinc USB crashing/not responding on iMac/10.5? / Nicholas Riley <njriley-AT-uiuc.edu> / 15 Jun 2009
Re: PowerLinc USB crashing/not responding on iMac/10.5? / Doug Kiekow <dougy-AT-iphouse.com> / 15 Jun 2009
Re: PowerLinc USB crashing/not responding on iMac/10.5? / heather james <thewebgal-AT-gmail.com> / 17 Jun 2009
Re: PowerLinc USB crashing/not responding on iMac/10.5? / James Sentman <james-AT-sentman.com> / 17 Jun 2009
Re: PowerLinc USB crashing/not responding on iMac/10.5? / Doug Kiekow <dougy-AT-iphouse.com> / 18 Jun 2009
Re: PowerLinc USB crashing/not responding on iMac/10.5? / Doug Kiekow <dougy-AT-iphouse.com> / 21 Jun 2009
Re: PowerLinc USB crashing/not responding on iMac/10.5? / James Sentman <james-AT-sentman.com> / 21 Jun 2009
