From: michael-AT-shed.com
Date: 16 May 2008 01:01:37 UTC   (04:01:37 AM in author's locale)
To: <xtensionlist-AT-shed.com>

Hi Mark,

Are all other things working ?
Can you issue commands with the CM15 and CM11 ?

Do you have one of the old TM756 or RR501 plug-in wireless receivers ?
If so you might verify that it can receive RF ...

perhaps you have a radio signal 'jammer' in the house,
like maybe a Palm Pad jammed into the couch cushions ??

michael

Mark said :

>After not monitoring my system for a while (a week or two), I noticed
>that lights weren't coming on with sensor movement. I have a CM15a
>hooked up to a Keyspan USB server and a WR800 on a Keyspan serial
>adapter. I notice in the log that no wireless signals are being
>received, and confirmed that with a keypad.
>
>On startup I see the following in the log:
>
>5/15/08 9:05:16 PM Opening Interface "CM-15a" at:
>5/15/08 9:05:16 PM Helper Command:
>("/Users/me/XTension.app/Contents/Pitchers/cm11.isf"
>/dev/cu.USA28Xb2P1.1 127.0.0.1 20300 04)
>5/15/08 9:05:16 PM Opening Interface "CM-11" at: USA28Xb2P1.1
>5/15/08 9:05:16 PM Helper Command:
>("/Users/me/XTension.app/Contents/Pitchers/W800.isf"
>/dev/cu.USA28Xb2P2.2 127.0.0.1 20300 05)
>5/15/08 9:05:16 PM Opening Interface "W800" at: USA28Xb2P2.2
>5/15/08 9:05:16 PM W800: Ready !
>5/15/08 9:05:19 PM CM11: CM11 successfully located
>5/15/08 9:05:19 PM CM11: Ready !
>5/15/08 9:05:19 PM CM15: Timeout waiting for ack for powerline command.
>5/15/08 9:05:19 PM CM15: Ready !
>
>Any hints on why wireless would just stop responding on both
>interfaces (CM15 and WR800)?
>
>Mark J
>
>G5 PPC
>Leopard 10.5.2
>Xtension Version 6.0 Beta 2 build 652